Sectioning Assignment Preparation

NBR® PHASE 2 SECTIONING 102

Preparation

Here’s How to Pass This Stage With Flying Colors: It’s simple. 1) Carefully review the below requirements & examples, 2) Complete your assignment as laid out, and 3) Submit your assignment for Review & Feedback exactly as instructed.

Assignment Requirements

For this assignment you will need to take the photos listed below:

  1. Sectioning for ONE row
  2. Sectioning for the BOTTOM row of 2.5 rows
  3. Sectioning for the MAIN row of 2.5 rows
  4. Sectioning for the MINI of 2.5 rows
  5. Sectioning for the 3rd of 3 rows
  6. Beadwork for the MAIN row of 2 / 2.5 rows
  7. Stitching for the MAIN row of 2 / 2.5 rows
  8. Start and End beads for the Main row of 2 / 2.5 rows

IMPORTANT:

  • You will be doing this on a REAL CLIENT.
  • Ensure that ALL photos are clear.
  • If ANY photo is missing, or incorrectly uploaded your test will NOT pass.
  • All of the sectioning photos do NOT have to be from the same client.
  • Even if your client is not wearing a 3rd row or mini, you can still use them to section off, and then take it down. 
  • The Beadwork, Stitching, and End Beads MUST be from the same client.

Click HERE to download your assignment checklist.

Example Photos

ONE ROW

Keypoints:

  • Do not take the photo directly from the back. That does not allow us to see the angle of the row.
  • The photo should be taken from the SIDE, or the CORNER of the head

BOTTOM ROW

Keypoints:

    • Do not take the photo directly from the back. That does not allow us to see the angle of the row.
    • The photo should be taken from the SIDE, or the CORNER of the head

MAIN Row of 2.5 Rows

Keypoints:

    • Do not take the photo directly from the back. That does not allow us to see the angle of the row.
    • The photo should be taken from the SIDE, or the CORNER of the head

MINI Row of 2.5 Rows

Keypoints:

    • Do not take the photo directly from the back. That does not allow us to see the angle of the row.
    • The photo should be taken from the SIDE, or the CORNER of the head

THIRD ROW OF 3 ROWS

Keypoints:

    • Do not take the photo directly from the back. That does not allow us to see the angle of the row.
    • The photo should be taken from the SIDE, or the CORNER of the head

BEADWORK FOR THE MAIN ROW

Keypoints:

    • Ensure that your photo is CLEAR and MOST of the beads can be seen

STITCHING FOR THE MAIN ROW

Keypoints:

    • Ensure that your photo is CLEAR
    • The photo should be close enough that the stitches can be seen

START & END BEADS FOR THE MAIN ROW

Keypoints:

    • Ensure that your photo is CLEAR
    • The ENTIRE bead AND the section need to be in the photo
    • Take the photo directly head on, not from any odd angles
Scroll to Top